Aussieveedubbers 路 Buying, Selling & Swapping Parts

Updated-Parts F/S Cabarita Beach, Shed clean out with pics

https://forums.aussieveedubbers.com/threads/99063/updated-parts-fs-cabarita-beach-shed-clean-out-with-pics

adams kombi 路

Hi all, as the title suggest's, I'm trying to free up space to make way for the next project.
Located at Cabarita Beach, may be able to pick up on Gold Coast.
My number, 0407 738 337 best to ring to ask questions or discuss prices, will put more stuff up for sale as I go through it all.
Please bear with me while I add photo's and descriptions, most parts are kombi/camper bits left over from my resto, just browse the pics and see if anything takes your fancy. If your chasing kombi parts feel free to ask if I have what you're after as I wrecked a couple during the resto process.

Under dash tray $30
Mesh sun visor$20, needs a bit of a straighten (sold)
Sliding door locking mechanisms $15 each
Dash's $30 each
Dash pad's, no cracks $30 each (both sold)
Type 2 beam from 73, $50
Various heads, Type 2 and type 1 single ports, $10-$50
3 X engines all CA numbering, $40-$60 each
Towbars X 2, $40 & $50 (small one sold, hoop towbar still available)
Engine stay, $10
Sway bar front, $15
Bumpers, off a 77 front and rear, $45 each
Engine lids, $30 each, make an offer on other bits in same photo
Standard kombi wheels 73 and 77, $5 each (3 left)
Gas box $15, Step $30, Stove $20, Poptop hatch $10, Bunk bed slats $10
Sink $40, Water tank stainless and cradle, $50
Type 4 alternators, $15 each
Braided hose and Donaldson air cleaner $50
2 Litre Type 4 engine (complete long, can throw in extra bits and pieces if needed), standard sizing, ready for rebuild $400

h 路

a year and model may help in your sale for the parts to suit 馃槈
good luck 馃檪

adams kombi 路

Rest of the pics hopefully!

adams kombi 路

And some more!

adams kombi 路

Last ones.

polarbus93 路

what sizing are the three motors please

adams kombi 路

I think CA were 1700's, if anyone wants to correct me go ahead. I bought the whole lot as I wanted the 2 litre but decided to rebuild another engine. So I have never really looked at them, they all turn over though.

LUFTMEISTER 路

CA=1700 F4 P 49 66 Type 2 1971 TO 1973

polarbus93 路

ok thanks ill be in contact tomorrow

binner 路

PM sent ....

bushed 路

bags the poptop hatch and the eng stay also the
bed slats
if i can pick up in afew weeks pls
paypal or cash
cheers B

adams kombi 路

Hi Bushed,

Direct bank transfer is best to hold parts, I can send you my bank details via text. I work at Nerang if that suits for pick up, let me know what you want to do.

Regards, Adam

adams kombi 路

Bump,

I've updated some prices.

I also have a lot of other bits and pieces left over from wrecking 3 kombi's that aren't listed. If you're chasing something ring, text or PM your question.

Menangler 路

Adam,
I am looking for 2 sets of flywheel bolts, so 10 and 2 sets of push rods (16) for a type 4 engine, do you have some?, would need them posted to 2541.
Thanks
Dave

vwking 路

you still got the plain towbar and mesh sunvisor cheers

adams kombi 路

Menangler,

Yes I have those items.

Sunvisor and towbars still available also.

vwking 路

pm sent tow bar mesh sunvissor

adams kombi 路

Have had a few people from Brisbane wanting parts and saying they'll arrange pick up. Just a thought but rather than multiple people doing trips may be able to organise someone to pick up and distribute to other for some fuel money or beer perhaps, dependent on anyone wanting to do it.

Let me know if anyone is keen and I'm happy to arrange. Parts must be paid for prior to pick up though.

tar76 路

I'm looking at heading down this weekend(Sunday) don't have much room as i'm going to somehow fit a kombi seat in a xr6 .

surfdub 路

Do you have an 1800 flywheel and clutch?

adams kombi 路

Surfdub,

Yes I have an 1800 flywheel and clutch.

bushed 路

cheers, been delayed
as i now have 3 crutches for a while, Adam
B
adams kombi wrote:Have had a few people from Brisbane wanting parts and saying they'll arrange pick up. Just a thought but rather than multiple people doing trips may be able to organise someone to pick up and distribute to other for some fuel money or beer perhaps, dependent on anyone wanting to do it.

Let me know if anyone is keen and I'm happy to arrange. Parts must be paid for prior to pick up though.

binner 路

Hey Adam, is it a pain to remove the 2 front hard brake line plates/stays that I have kinda circled in the pic attached. I hear these are a non repo part and I need em both. 馃檪

surfdub 路

PM Sent