Look closely at the wheelie bars - nice 's' shape.
This is the result of a 6500rpm launch and drop the clutch!
VWMA Editor 路
Aussieveedubbers 路 VW Drag Racing
Wheel Stand
https://forums.aussieveedubbers.com/threads/99235/wheel-stand
whathaveidone 路
Nice!!!! Are you trying to compete with brad and wayne馃槀
1916baja 路
Shit ben i reckon yours from 2011 is about the same as that....
vw54 路
Is that YOU really driving or was it the substitute driver ???????
who taught you that
who taught you that
VWMA Editor 路
Actually my aim was to see how high I could go, but after I bent the wheelie bars on this run I had to settle down for fear of breaking them馃槀
Surprisingly it never came down hard and drove straight without ever having to lift the foot! However, slipping the clutch produced the better times (7.81s for Ashley) as opposed to wheelies (8.0s me).
Surprisingly it never came down hard and drove straight without ever having to lift the foot! However, slipping the clutch produced the better times (7.81s for Ashley) as opposed to wheelies (8.0s me).
vw54 路
think i will have to have TEST drive in FEB 馃檯馃檯馃檯
VWMA Editor 路
Buggy is for sale Dave. Check the classifieds in the next issue!!
typethreeking 路
Westi's wheelie was twice as high in Sydney without wheelie bars, only stopped by the exhaust but his landed hard and bend the front end, not to say hurting brads back... Lol
VWMA Editor 路
That's cause Stocko was still in the back doing the tune!!!馃槀typethreeking wrote:Westi's wheelie was twice as high in Sydney without wheelie bars, only stopped by the exhaust but his landed hard and bend the front end, not to say hurting brads back... Lol
humpty 路
Stop it Craig.... Your teasing me now.....
hypo-vw 路
I will go one better than that...... my exhaust goes forward , so when the oval stood up at the Sydney Jamboree 2012 the rear apron & bumper stopped it along with the engine crossmember scraping rubber from the track surface . Still ran a 10.6sec pass and beat the mazdatypethreeking wrote:Westi's wheelie was twice as high in Sydney without wheelie bars, only stopped by the exhaust
sauron 路
Has this turned into a "my wheelie's better than yours" now? 馃榿
LIFE IN THE LOW LANE 路
That shot of your car Wayne highlights the need for some detailing and cleaning of the floor pans and suspension lol
Nice shot none the less!!!
Best wheel stand for is still Aaron's effort from Warwick 2008 - wheels up all the way past the 60ft mark!!!
Nice shot none the less!!!
Best wheel stand for is still Aaron's effort from Warwick 2008 - wheels up all the way past the 60ft mark!!!
matberry 路
馃槀馃槀馃槀VWMA Editor wrote:That's cause Stocko was still in the back doing the tune!!!馃槀typethreeking wrote:Westi's wheelie was twice as high in Sydney without wheelie bars, only stopped by the exhaust but his landed hard and bend the front end, not to say hurting brads back... Lol
LOWBUG 路
Na not going there.
dangerous 路
This one was over 20 years ago.
It did it in second gear too.
matberry 路
Well if we can go that far Dave, I don't want to miss out. 馃槀
vassy66T1 路
And me 馃槀馃槀馃槀馃槀馃槀馃槀馃槀
LIFE IN THE LOW LANE 路
Marcus that pic looks like it was well over 20 years ago lol
Dangerous/ Matt was there for both of those occasions!!
Dangerous/ Matt was there for both of those occasions!!
vassy66T1 路
Try 25 years ago (date is on bottom RH corner)
LIFE IN THE LOW LANE 路
Hahahahaha didn't see that looking at the pic on my phone!! Few more signs of wisdom up top these days Marcus!!