Board Logo

AUSSIE AGENT OR STOCKIST OF IOZZIO WHEELS?.
snitz - July 18th, 2013 at 01:07 PM

Hey fellow dubbers..Im looking to buy some 17x7 Iozzio Fuchs for our 76 bus and was wondering if there is an Australian dealer or stockist for these wheels?..
.Cheers Jason.

Special Air Service - July 18th, 2013 at 10:11 PM

das resto's I think

snitz - July 19th, 2013 at 11:45 AM

No luck with Das Resto Haus..they only sell empi 17" Fuchs.Dont mind the Empi wheel but by the time I black out the inside of their Fuchs its going to make buying IOZZIO Fuchs more appealing.. which are custom made 2-piece forged wheels.The IOZZIO wheels would be even more appealing if the AUD $ was good :(

Dasdubber - July 19th, 2013 at 06:53 PM

We (DAS Resto Parts) can facilitate the process but do not hold them in stock due the variations in diameter (17 and 18) and widths (6 to 10 inches) and offsets. We have a good rapport with Paul but you are right, the wheels are not cheap.

here is a set we fitted to the red/white splitty we built:
http://i10.photobucket.com/albums/a145/Dasdubber/Armandos%2059%2011%20window/Apr29KMTshow13.jpg

We're happy to help with the process if need be but you'll have to have your offsets and widths all sorted before ordering.
Cheers
Al

info@dasrestoparts.com.au

snitz - July 19th, 2013 at 09:18 PM

Cheers Alan..thanks for the reply. I am looking to fit 17x7s on our 76 tin top Kombi..both front and rear. I guess the offset for our 76 kombi would be the same as US spec kombis?..The kombi will be stock with no change in wheel track, I am only adjusting springplates and fitting beam adjusters for a mild drop in height.
Maybe Paul has the specs on file?.Im looking at the Fuchs that are detailed..Ie polished with black inserts.Are you able to PM rough prices?.Excluding shipping from DAS Resto to Adelaide..Thanks for any info in advance..regards Jason.