Board Logo

Chrome Platers in Sydney
GottaSplit - March 10th, 2014 at 02:36 PM

Hey Girls and Guys. As per the title, I need to get my bumpers and a few bits and pieces re-chromed for my bus and I wondering who you guys do/dont recommend...
I'm willing to travel the greater Sydney area for the best service as I am after perfection....
Cheers Jamie


barls - March 10th, 2014 at 02:42 PM

Last one I got done was in coffs and the one before that was in newcastle


restonubie - March 10th, 2014 at 03:00 PM

The guys at VVDS put me onto Albury Electroplaters when I had the bumpers on my Ghia done. They did a fantasic job. The bumpers were in reasonable condition for their age and only needed a small amount of repair work.
People ask me if the bumpers are brand new and are impressed with the re-chromed result.
http://www.alburyelectroplaters.com.au 


vw54 - March 10th, 2014 at 07:20 PM

All metal bumpers Ingleburn

especially if you need to get bumps fixed 0438-765-097


GottaSplit - March 10th, 2014 at 10:23 PM

Thanks guys. I will look into Dave's recommendation as its a little closer, if not a trip to Albury maybe on the cards......


vw54 - March 11th, 2014 at 06:34 AM

It wont be cheap prob 400 a bar but nice job


kathawkephotos - March 13th, 2014 at 07:58 PM

Jamie, if it comes down to it; I'm heading to Albury in April for dubs in the square if you want me to take anything down for you :)
you'd just have to sort out the "getting them back" part!


GottaSplit - March 14th, 2014 at 02:12 PM

Hey Kat thanks! I will sus out the Ingleburn platers and take it from there.... road trip to Albury could be on the cards for pick up. Im not in a rush as I will do it when I get a start on the body work. Making a start on the research