There's a nos "K-mac" sway bar on ebay for $205 Aus,to fit balljoint front ends!Is this expensive or cheap?Just wondering!

well its not cheap if you compare it to a whiteline swaybar. I know my whiteline adjustable was less than $200 and they are a better designed swaybar.

Where do you get the whiteline Craig?

On the topic of swaybars does in one in Aus make/sell camber compensators and what kind of price would I be looking at?

vintage veedud supplys in Sydney sell compensators I think thay are around 200 bucks

Whiteline BWF16Z is $225+$55 fitting thats for front link-pin.Camber Compensator was $96usd +$32usd surface parcel rates 4-6 weeks.

to let U know I have fitted 11 Hr holden to the rear of type three vws ,work a treat and cost is very low ,weld some tabs on the arms braket on the torsion tube and you ar away .

Now thats the sort of sh## we like to hear,whats the diameter of the bar.

around 19mm I think work very well ! I have it fitted to my trike as well !