Board Logo

You can't get lower!
Dannyboy - December 6th, 2005 at 10:47 PM

Told ya!

Dan:thumb

zac_smits - December 7th, 2005 at 11:12 AM

shibby!

PrettyBlueBug - December 7th, 2005 at 11:33 AM

Hmm.... better hope there's no petrol leaks anywhere! :P

Fossil - December 7th, 2005 at 12:57 PM

yep about as low as you can go

VWFREAK - December 7th, 2005 at 03:45 PM

Lies, there's still a good 2 inches at the rear. Go hard or go home.lol

Very cool

killakornkobb - December 7th, 2005 at 04:54 PM

owwwwwww yeah :D

ruckus - December 7th, 2005 at 05:08 PM

Well that's one way to solve the annoying problems I'm having. Anyone got any bright ideas?



click me

[ Edited on 7-12-05 by ruckus ]

helbus - December 7th, 2005 at 05:12 PM

That's right. If you grind it off using the road, eventually it will grind away until it doesnt toch anymore.

killakornkobb - December 7th, 2005 at 05:33 PM

thats what i did... i didnt have cool sparks though :(

shiftyvw - December 7th, 2005 at 07:05 PM

Bolt some small titanium blocks as skid plates where the chassis touches, that should get some sparks happening!

a1samurai - December 7th, 2005 at 08:46 PM

A few of the mini-truck boys use titanium skid plates for that effect.

Though I have seen one '36 Ford Pickup in California that was so low it would scrape on the lane dividers! :smilegrin:

Dannyboy - December 7th, 2005 at 08:56 PM

I know from riding bikes that you could get knee sliders with flints inbedded in to the palstic. get your knee down around a corner and watch the sparks fly!

Crazy stuff

Dan:thumb