Has anyone in Brizvegas got a 38mm 3/4" drive socket that i could borrow for a couple of days. Why, i was about to remove the gland nut from the flywheel and it is a larger size gland nut it's 38mm not 36mm standard. I have a 36 and 46mm socket but no 38mm. Any help will be repaid in a 6 pack of your fav swill. Cheers Damo.

38.1 mm is the same as a 1 1/2" AF socket. If you have anyone with an imperial set they will get you out of trouble.

DH

Never thought of that, will have to wait till monday now when i get back to work and check if they have one, but still prefer metric if possible.

get off ya butt and come and get it! (left me mobile at work DOAH!)

Got one, happy days.

>Never thought of that, will have to wait till monday now when i get back to work and check if they have one, but still prefer metric if possible.<

With 0.1mm being the thickness of a sheet of paper, it doesn't make any difference in the fit on the nut. There are a few sizes in the imperial range which fit metric.

DH