via VWvortex

Aussie Member needs help with history of this part please post answers and I'll direct this link to him.


http://forums.vwvortex.com/zerothread?id=2704677 

Thanks in Advance

dammit I tried to post at vortex but not a member so it was lost.

Shouldnt be any problem pulling the back off so long as it doesnt get turned upside down. There is probably a gasket or o-ring sealing it, so gently lift the cover making sure not to break the seal. If it is broken... no biggy, cut another gasket, buy another o ring.

I was a fitter and turner once upon a time and did plenty of roll grinding(accuracy had to be within 0.0025mm!) The gauges would fill up with coolant, which would dry and make them sticky. I've pulled them apart dozens of times.

Yeah there is nothing to worry about with taking the back off, simple as taking the 3 screws out and it will lift off. you wont upset anything by doing this.
done it dozens of times myself for work.
Cheers
Brendan

Thanks :thumb Special Air Service & amazeer, have used your posts and quoted them on VWvortex forums.

[ Edited on 18 July 2006 by phaeton ]