Board Logo

Pic upload
GTMac - July 28th, 2006 at 10:00 PM

Guys hope this post is OK in this section. For the life of me I cannot get pic uploaded. Yes have read posts on how to and size etc but still no luck. Hit attach file, browse, go to my pics, double click, seems to add file name but no pic when I preview post or post. End up deleting post.

Any ideas as I have a few people interested in seeing my Fasty EJ20T project.

Thanks, Andrew


barls - July 28th, 2006 at 10:02 PM

try uploading you photos to this site http://www.photobucket.com  then you can just copy the link and paste and you will have your photos


68AutoBug - July 28th, 2006 at 10:16 PM

I wasn't having any problems until I started using different programs etc experimenting...

and My photos were saved without .jpg on the end, so they don't work....
but all of My others do work OK....

I will admit there are some sites/forums that I cannot work out how to post pics, but I find here very easy...

I just browse... and click...
I save all My pics below 100kb in size..

I'm still learning about paste etc...
only have succeeded doing it once so far....
that still seems complicated to me. lol...

best of Luck

Lee


68AutoBug - July 28th, 2006 at 10:19 PM

I forgot to say that
I have saved all My pics in My computer...
so I just have to find them

Browse and click..

best of Luck

Lee


GTMac - July 28th, 2006 at 11:00 PM

Thanks, tried photobucket and no probs.