Aussieveedubbers - Powered by GaiaBB

Wanted. Bolts holding on front end.

duncombemu - May 14th, 2003 at 10:58 PM

I'm after the four bolts that hold the torsion bars (ball joint), to your frame head. I've 'borrowed' them from my farm buggy, but I need to replace them.
Can anyone help?
Regards,
Mark
:thumb

Buggy Boyz - May 14th, 2003 at 11:01 PM

I have got some of them kicking around. You best bet would be to just go to a bolt shop. I can send you the specs in the next few days wehn I get home in the daylight.

duncombemu - May 14th, 2003 at 11:09 PM

Buggy Boyz, just send me the length and the diameter and pitch of the thread. Yes, then I can go to a 'bolt' shop (don't laugh) and buy the correct type.
Thanks for the info.
Regards,
Mark:thumb

type82e - May 14th, 2003 at 11:38 PM

just pull one out and take it with you to the "bolt shop"
marcel

duncombemu - May 14th, 2003 at 11:53 PM

type82e (marcel), sometimes you can just get too 'close' to a problem and don't see the obvious answers.
Thanks, I'll take one of the bolts to the shop. Great.
Regards,
Mark:thumb

silver - May 15th, 2003 at 09:19 PM

Just don't do the bolt from the "shop"

duncombemu - May 16th, 2003 at 08:04 PM

Silver, very funny I can be a real 'nut' sometimes.
Thanks for the 'thread'. I'll make a 'bolt' for the bolt shop and 'socket' to them.
Mark:P:thumb