Board Logo

Split case transmission parts
lownslo - September 27th, 2007 at 10:46 AM

Ok so I need a split case gasket kit

http://www.wolfsburgwest.com/img/wwpn/111398003.jpg

and

Gearshift housing bushing
http://www.wolfsburgwest.com/img/wwpn/111301207.jpg

problem is absolutely nowhere has these parts that I can find. Is there someone out there who has sourced these parts and can point me in the right direction. Can be anywhere world wide I don't care I just need these parts and will pay whatever to get them. Lots of places list them in there catalogs but don't have them in stock, so I'm at a loss.

or alternately can someone tell me the specific thickness's of the gaskets in the gasket set or if it actually matters what thickness other than the one that mount up the axle boot retainer to transmission.

cheers

[ Edited on 27-9-2007 by lownslo ]


vw54 - September 27th, 2007 at 11:42 AM

Have you tried Vintage in Sydney 02-9789-1777

or failing that i suggest Wolfsburg West in LAX


xornge666x - September 27th, 2007 at 11:52 AM

these guys list them, http://www.vintagepartsinc.com/300_transaxle.html 
and so do BFY http://www.bfyobsoleteparts.com/Beetle-Transmission-Gasket-Kit-p-1432.html 
good luck!


xornge666x - September 27th, 2007 at 11:52 AM

wolfsgurg west nil stock...


lownslo - September 27th, 2007 at 11:58 AM

yeah wolfsburg are out of stock. And no longer have a supplier for said parts.

I just stumbled across BFY about 5 minutes before your post and I am putting in an order as we speak. Been chasing these parts for months now :P See if BFY can deliver on the goods unlike everyone else.

cheers for that..


57oval - September 27th, 2007 at 12:26 PM

Split case gasket kit are sometimes available on ebay, $9.95. I have one if you are desparate.

[ Edited on 27-9-2007 by 57oval ]


Matt Ryan - September 28th, 2007 at 10:05 AM

There's a gasket kit on egay now

http://cgi.ebay.com.au/VW-VOLKSWAGEN-TYPE-1-2-36HP-GEARBOX-GASKET-KIT-GERMAN_W0QQitemZ200157039448QQihZ010QQcategoryZ72456QQssPageNa meZWDVWQQrdZ1QQcmdZViewItem


Regards,

Matt.


lownslo - October 16th, 2007 at 02:47 PM

BFY obsolete have to be the worst spare parts place I have ever dealt with in my life. there reproduction parts are of piss poor quality and the nose cone gearshift bushings are of a wrong ID & OD so they don't even fit and the gearshift hockey stick does not even fit inside the bushing. WTF is wrong with these company's!!! :grind::grind::grind::grind::grind::grind::grind::grind::grind::grind::grind::grind::td::td::td::grind::grind::grind::grind::grind:

The gasket kit wasn't sent and I had to pay $40US for postage for snail mail!!!!!! :no: 3 weeks postage what a crock


LIFE IN THE LOW LANE - October 16th, 2007 at 06:47 PM

Gear shift bushings could just be made if you have measurements and id and od. as for gaskets if you can't get them get both surfaces dead flat and use some sealer.


lownslo - October 16th, 2007 at 07:00 PM

Quote:
Originally posted by LIFE IN THE LOW LANE
Gear shift bushings could just be made if you have measurements and id and od. as for gaskets if you can't get them get both surfaces dead flat and use some sealer.


Some of the gaskets double as a shim though, otherwise I would have done this


xornge666x - October 17th, 2007 at 07:18 AM

USPS no longer do ground shipping... did they charge you $40 US to send gaskets??
thats ridiculous!
If you are still stuck, I can try a supplier near me, who has a lot of NOS german stuff still, and see what he has.
I send stuff back home to OZ all the time, and you can send a lot for $40!
I just sent a crank, bearings and engine gaskets for $100...


Matt Ryan - October 17th, 2007 at 09:48 AM

Another gasket kit on ebay at the moment -

http://cgi.ebay.com.au/VW-VOLKSWAGEN-TYPE-1-2-36HP-GEARBOX-GASKET-KIT-GERMAN_W0QQitemZ200162894106QQihZ010QQcategoryZ72456QQssPageNa meZWDVWQQrdZ1QQcmdZViewItem



Regards,

Matt.


lownslo - October 17th, 2007 at 06:04 PM

Quote:
Originally posted by xornge666x
USPS no longer do ground shipping... did they charge you $40 US to send gaskets??
thats ridiculous!
If you are still stuck, I can try a supplier near me, who has a lot of NOS german stuff still, and see what he has.
I send stuff back home to OZ all the time, and you can send a lot for $40!
I just sent a crank, bearings and engine gaskets for $100...


There is other postal company's they could use. I get sent from the US all the time and usually its about $20, and that is express so 3 day delivery time, and the items weigh a lot more than this lot did, and larger too.

Ohh and they said fedex express postage would have been $262 when I asked why they couldn't send ti express ahahaha what a crock.

I sent quite a few angry e-mails to them, should be quite interesting to see their reply.

Have my gaskets and all parts now so happy days and time to build this car.