Board Logo

had to
X-I-TED - July 21st, 2008 at 01:46 PM

my new donk:cool:
how could i pass this up $ for $ and $ for hp

New 2332 Turn Key Engine Price: $5500 obo
84 X 94 Universal Super Case, Welded #3 Cylinder
84mm Forged Chromoly Crankshaft
5.500 Forged Chromoly H-Beam Rods
Forged Chromoly Light Weight Flywheel
Manton Chromoly Push Rods. .035 wall thickness
94mm Mahle Piston/Cylinder Kit
#2246 Camshaft 308° duration x 410 lift at cam
1.1 Ratio Rocker Arms w/ swivel feet adjusters
Hardened Rocker Shafts
Billet Distributor Clamp
044 Heads 42 x 37.5 Stainless Steel Valves,
Dual Springs, Chromoly Retainers
Stage 1 Kennedy Pressure Plate w/200mm Daycon Disc
Bosch 009 Distributor w/Bosch Blue Coil
Dual 44 IDF Weber Carb Kit with CB Hexbar Linkage
Doghouse Fan Shroud w/ high amp Bosch Alternator
26mm Keyed Oil Pump
Degreed Crank Pulley
Chromoly 8mm Head Studs
94mm Teflon wrist pin buttons
Windage Tubes
Chromoly Straight Cut Cam Gear Assembly
8.5:1 Compression, and dyno tested 195 hp on pump gas
Complete Offroad exhaust

http://www.thesamba.com/vw/classifieds/detail.php?id=613930 

vwsteve - July 21st, 2008 at 01:51 PM

wow, swap u for a 1600 baja motor, even paint it with tiawanese chrome for u:lol:

h - July 21st, 2008 at 02:45 PM

* WARNING * WARNING *
**damage to eyes may result - wear dark eye protection**
hehe :lol:

baybuscamperkid - July 21st, 2008 at 04:59 PM

impressive if its good! how much time and money to get it over here?

X-I-TED - July 21st, 2008 at 07:08 PM

Quote:
Originally posted by rexy
wow, swap u for a 1600 baja motor, even paint it with tiawanese chrome for u:lol:

OK but only if it puts out more than 195hp
id even consider 160 without the taiwanese paint (cos you and i both know that there is more than 35hp in a can:lol:)

vw54 - July 21st, 2008 at 07:10 PM

Quote:

8.5:1 Compression, and dyno tested 195 hp on pump gas



thats a BIG claim hope its all good

LUFTMEISTER - July 21st, 2008 at 08:06 PM

Not much history on the seller (may 2008 joined). Have you checked the U.S white pages to make sure of his details. better to check now......... than PAY later, long way to chase a refund. My2c

Bizarre - July 21st, 2008 at 08:21 PM

I would as a few questions of others that have used him. Its a LONG way to complain

Member since: May 22, 2008
Ad placed; Fri May 23, 2008 12:15 am

One question is "is it new parts" or are the internal parts refurbished??

The HP would be on the bench, no belt at best

Yes - the $$$ is REAL good at the moment, but.............

Best of luck

X-I-TED - July 23rd, 2008 at 11:00 AM

motor built by pat downs all new bits 4-500 shipping

Baja Wes - July 23rd, 2008 at 12:56 PM

I hope you like noise. The straight cut cam gears will be as loud as the exhaust :)

vwsteve - July 23rd, 2008 at 01:12 PM

at least it will be good noise:tu:

X-I-TED - July 26th, 2008 at 02:34 PM

Quote:
Originally posted by Baja Wes
I hope you like noise. The straight cut cam gears will be as loud as the exhaust :)

lucky im almost deaf thanks to years of big bore two strokes
so your saying i wont be able to hear the girlfriend complaining "your going too fast" over the noise of the cam gears BUGGER! :lol:
thats what i call "good noise"
imagine getting defected for noisy cam gears in a buggy with cannons