Board Logo

Damage Repair
skintsaint - November 1st, 2008 at 09:44 PM

hey all,

someone took a bite outta my beetle and left some damage to the front before driving off. :grind:

The bumper is bent away from the body of the car and I cant bend it back using my own strength or by pushing the bumper against a wall and using the car to bend it back.

So basically is this going to cost a lot to replace/repair?

Any help/advice much appriecated. :cool:

[img]http://img227.imageshack.us/my.php?image=dscn2483wh7.jpg[/img]


Bizarre - November 1st, 2008 at 10:02 PM

http://img227.imageshack.us/img227/5920/dscn2483wh7.jpg
http://img227.imageshack.us/img227/dscn2483wh7.jpg/1/w2592.png


Bizarre - November 1st, 2008 at 10:06 PM

for what it is worth

I repaired this
http://i35.photobucket.com/albums/d170/blue74l/vw-parts0008.jpg

to this
http://i35.photobucket.com/albums/d170/blue74l/100_0985.jpg

With not much more than a spanner and hammer


You probably wont be able to repair the bracket but i reckon you could belt the bumper into a "looks good from 10 feet" type of bumper

Looks like an original German bumper so worth having a go


68AutoBug - November 1st, 2008 at 11:37 PM

Bumper looks too rusted for a German one...
although the chrome would be rusted if it was a brazillian one.. must be German

You could get all the bits you need from a swap meet...

If You use longer bolts - Cuphead - on the bumper
You can probably pull the bracket into line
if its not too far out of shape..

You are lucky the thing that hit You was going past your car and NOT the other way...

remember - You can drive without the bumper and brackets .. just screw the number plate to the body...

the brackets are easy to come by - Left & Right are different-

You would need to replace the Guard - fender -
just unbolts... although it looks like you live near the coast
lot of rust there...
so the nuts u that hold the fender/guard on will be difficult to take off.. throw the old nuts away...
use zinc plated new nuts.. cheap..

You may be able to find used White Guard -

the Left hand bracket may be bent too...
but can probably be straightened out...
those brackets are pretty tough..
You can get later brackets which are thinner...
looks like your beetle is a 1302S Superbug... 1971-72

cheers

Lee


trickysimon - November 2nd, 2008 at 02:35 AM

:grind:
Hope all ends up well and you get it fixed
Simon


Bizarre - November 2nd, 2008 at 11:31 AM

Quote:
Originally posted by 68AutoBug
Bumper looks too rusted for a German one...
although the chrome would be rusted if it was a brazillian one.. must be German




Lee
Have a look at mine

They are German
A wire brush and a coat of Hammertone and they have lived outside for 3 years

As for repairing them, all you need is
1) a decent hammer. I have a big ball pein. Even a small sledge
2) some hard wood blocks roughly the shape of the bar.

Put these inside and whack away :lol:


helbus - November 2nd, 2008 at 06:24 PM

Brickies set chisel is what I use as one of my main bumper repair tools.


skintsaint - November 4th, 2008 at 12:42 AM

cheers for the advice guys.

Will get the bumper off to get it back on the road at least.

p.s sorry for the supersized pic!! :lol: