Thanks to all those who have been answering my many questions. I'm now at the final stages of finishing my bug. My next question is for those who have a shortened front end, I have a 2" narrowed beam on order and want to know if using a shortened sway bar is the way to go? Some one advised the front end will be stiffer after shortening the beam and not to bother with a sway bar, but I dont want to cut any corners. Any advice? Thanks.

Mick058 has a shortened swaybar on his 2inch shortened beam. Try shooting him a pm

As posted by Damo here...http://forums.aussieveedubbers.com/viewtopic.php?tid=79796&page=1#pid743702....

Do a search on Selbys Swaybars. They have them off the shelf for narrowed frontends... http://www.selbys.com.au/search_cc.php

I don't have one on my car, but it does have Koni shocks which tend to help stabilise it a bit. The car handles ok,it just gets a bit daunting at high speeds (above 150ph) without the bar.......and the fact that the front track is narrower than the rear !