Board Logo

fuel pumps.
amazer - June 30th, 2003 at 07:55 PM

ok people with serious cars. What are we all using for fuel pumps. EFI turbo cars is what I am interested in.

Craig Torrens - June 30th, 2003 at 08:07 PM

Sorry carbies and normally aspirated !!

But I use a FACET pump .:D

amazer - June 30th, 2003 at 08:14 PM

I need fuel to spray from injectors, not dribble.

Tazz - June 30th, 2003 at 08:16 PM

I know a guy is using a nissin 260Z pump....
used to run a 6CYL EFI nissin engine....

Craig Torrens - June 30th, 2003 at 08:24 PM

Oops sorry:cry

56astro - June 30th, 2003 at 08:30 PM

*voice of Cartman*

Respect mah arthoritar!!

speedster356 - June 30th, 2003 at 09:33 PM

If it a spray nozzle you want to use then try a fuel pump from a mechanical fuel injected car (I used one from a Triumph I think it was for the jetbike) as the pressures are much higher than electronic FI. Something in the order of 100psi I got I think?

Dasdubber - June 30th, 2003 at 09:40 PM

Sorry no EFI turbo here but I will be running a Holley blue with red regulator to drop the pressure down to a measly 3-4psi....just the way the dual dells like it!

Hope you find what you are after though.

Peter Leonard - June 30th, 2003 at 09:49 PM

200 bucks gets you a k2 karcher.. 1450 psi....
raahhhgghhh:D

1303Steve - June 30th, 2003 at 09:49 PM

Hi

Im using a VL turbo and Leighs running a NA VL, we are both using Carter lift pumps to fill our surge tanks.

1302Steve

Keith Haeusler - June 30th, 2003 at 10:03 PM

Frazier,
I got a couple sitting here in the shed, you can have one if you want. They have 1/2 inch inlet with a 3/8 outlet. Keith.

amazer - July 1st, 2003 at 07:09 PM

what sort? send me u2u? let me know when I can come and pick one up. and a reminder of directions.