hi, im restricted for space.do u know of an oil cooler similar to rx mazda coolers, but not as deep. so 500mm by 50 by 80. the rx one is about 100, so too wide. thanks for u assistance...........greg ps with same b oil line outlet pattern as rx

where are u putting it i put mine on top of the gerbox with ducting and it worked a treat

above trans, have an 091 in bug so not as much room

Hi

Put it up the front if your short on room.

Steve

i put it up front on my manx yrs ago, but dropped too much pressure

What size pump would you run if the cooler was up the front?

Cheers

Newt

Hi

Im using a pump with 32 mm gears, I take the oil from the stock take off block position and no internal oil cooler.

Steve