I'm going to boris's picnic day tomorrow and was hoping someone could lend me a 36mm socket and dirty great big breaker bar to get my castle nuts off?

I'll be off the forum till late tonight so here's my mobile if anyone can help. 0410642635 Cheers Ron.
Club VeeDub member.

I'll bring a 36 if that helps, can't bring the breaker bar though.

OK looks like the picnic days has been rained out.
Can anyone in syd lend me the tools, I don't mind going for a drive.

Dude, just buy them! I did and I am glad that I did so, they have come in handy many times. Think of it this way, the cost of the tools is less than having a workshop take the drums off and do your maintenance work for you, and after that one-off purchase every other time is free.

I had already bought a 600mm breaker bar in 1/2" drive for use on wheel nuts and other general use, and I had a 1/2" drive rattle gun, so I bought my 36mm impact socket in 1/2" drive. This is probably the best solution for a backyard mechanic, although you could go 3/4" drive if you felt that it was necessary. A long 1/2" drive breaker bar is worth it's weight in gold, I use mine all the time. Even if the nut which you're undoing isn't that tight, it is much more comfortable and safer to crack it off easily with a long bar than it is to heave and strain on a short bar.

36mm socket is a special order, i asked when i grabed my 750mm 1/2" breaker yesterday.
Just trying to get em off today as they are for sale and i said i would.

Special order? What kind of dodgy tool shop is that? Mine wasn't.

Got one.

Hey Ron,

I'd suggest welding the socket to a good length of thick steel pipe. We snapped two breaker bars getting mine off, so I got a mate to weld it to a 3 ft length of fence post (You know like the old fence posts that were on schools/uprights for traffic signs kinda thing). I just painted it up to protect it and it'll last forever.

Cheaper than a new breaker bar at any rate!

I thought it could have been a cheap breaker bar, but the mate who was helping me with it is a mechanic and said it was a bloody expensive german one, as he generally buys tools that are built to last.

I didn't mind parting with the socket, as I don't have any other size 36 nuts that need shifting.

For a 36mm wheel nut, I bought a 3/4" drive socket & bar. Got it from a dedicated tool shop who had it in stock. Can't remember which one. It's very strong. I usually jump on it. It does the job easily. A good investment

Tried the 6 foot pipe method, can nearly flew threw the garage door. Cant brace the wheel with angle iron, castle nut and me stuck between a rock and a hard place.

Anyone! got a torque miester???

(is there a smiley for begging?)

I had one that the torque tool wouldn't remove - ended up getting a flogging spanner from Lindsay on here. ( http://forums.aussieveedubbers.com/viewtopic.php?tid=82243  )

An 8 lb sledge hammer + heat did the trick.