WHO SELLS BODY RUBBERS FOR POP OUTS?
68AutoBug - September 14th, 2011 at 07:31 PM
I have pop outs for My 68 beetle and only need to get the body rubbers....
two lengths of 75 inches long [from CIP1 website]
anyone know what its called at clark rubber etc..??
is it the same as mexican style bonnet rubbers??
Lee
Bizarre - September 14th, 2011 at 07:35 PM
i got mine from VVDS
No - it is different from mexican rubber trim
vw54 - September 14th, 2011 at 07:40 PM
Lee thats the most sillist thing i have every heard u say
VVDS 9789-1777
68AutoBug - September 14th, 2011 at 07:43 PM
| Quote: |
Originally
posted by Bizarre
i got mine from VVDS
No - it is different from mexican rubber trim
|
thanks
and vw54 I did get My Mexican type bonnet and engine lid rubbers from VVDS...
I knew VVDS would have the pop outs etc just wondered about generic rubbers/body trim...
Cheers
Lee
gerggl - September 15th, 2011 at 10:14 AM
Don't let them get up you Lee ...smart people look at all alternatives ..... go hard or go home!
esevwbits - September 15th, 2011 at 07:36 PM
standard pinch mould? $4 a metre?
68AutoBug - September 16th, 2011 at 01:42 AM
| Quote: |
Originally
posted by esevwbits
standard pinch mould? $4 a metre?
|
from clarke rubber???
LEE
HappyDaze - September 16th, 2011 at 06:23 AM
| Quote: |
Originally
posted by vw54
Lee thats the most sillist thing i have every heard u say
VVDS 9789-1777
|
Geez Dave, that's a bit unkind........I'm sure that's not true! 
MISS VDUB - September 16th, 2011 at 08:39 AM
Pinch Weld, and yes, Clarke Rubber by the metter and there is a couple of different thickness's for around the body frame.
Or are you talking about the rubber used in the window frame itself?
vw54 - September 16th, 2011 at 11:32 AM
| Quote: |
Geez Dave, that's a bit unkind........I'm sure that's not true!
|
Greg u may be right
esevwbits - September 16th, 2011 at 07:28 PM
yes
http://www.clarkrubber.com.au/rubber-seals-and-mouldings/pinchwelds-and-baile...
but just go to an automotive shop, will probably work out cheaper than those crooks.
try Daleys out west syd. pick my material up from them mostly.
Wannavee - September 16th, 2011 at 10:10 PM
You SURE its a pop out and not a 'Hi Do You mean the small quarter window on the DOOR??'
68AutoBug - September 16th, 2011 at 10:23 PM
| Quote: |
Originally
posted by MISS VDUB
Pinch Weld, and yes, Clarke Rubber by the metter and there is a couple of different thickness's for around the body frame.
Or are you talking about the rubber used in the window frame itself?
|
Hi Ash
the pinchweld itself [couldn't think of the name]
I have all the other bits - rubbers - hinges covers screws etc
and its getting hotter .. lol.. 28c today..
cheers
Lee
MISS VDUB - September 16th, 2011 at 10:27 PM
Got mine from Clark Rubber, only place that sold the width I needed to cover the frame. Wasn't badly priced and purchased to the exact length I
needed.