Board Logo

Anyone with a type 4 motor in Sydney on the floor?
ttriebler - October 2nd, 2011 at 03:06 PM

Wondering if anyone has a type 4 motor lying around in Sydney. I want to unbolt the flywheel and bolt an adaptor plate and custom flywheel to it to check clearances for my project.

Hoping to have a look at one over the long weekend if someone has an hour. Will bring my own tools - and beer.

thanks

Todd
0419243275

HappyDaze - October 2nd, 2011 at 03:43 PM

Is Bowral too far for you? I've got one in bits, that you could 'whack together' for a mock-up.

barls - October 2nd, 2011 at 03:44 PM

Try Richard at vforce

ttriebler - October 2nd, 2011 at 04:16 PM

Quote:
Originally posted by HappyDaze
Is Bowral too far for you? I've got one in bits, that you could 'whack together' for a mock-up.


Nope, Bowral's not too far for me...I could come for a drive in the morning. As long as we can get a crank into the case and get the crank spinning then all is good. Just want to check clearance of the case v adaptor plate v flywheel.

Can you PM me details ?

HappyDaze - October 2nd, 2011 at 04:24 PM

PM sent.

ttriebler - October 3rd, 2011 at 01:53 PM

Thanks so much to HappyDaze for his time this morning. We bolted everything up, check for fit/clearance and then packed it all away. How great is the VW community when you can have access to resources like this? Thanks again, let me know your preferred beer and I'll send some your way.

cheers

Todd

HappyDaze - October 3rd, 2011 at 02:36 PM

A pleasure, Todd. It' nice to see someone DOING something, instead of just TALKING about it.:tu:

Cheers, Greg

PS. Don't forget to put your clock forward 1 hour.:lol: