Board Logo

baja guards oversize- who makes them????
scot70wagon - February 11th, 2012 at 08:37 PM

does anyone know who makes 4-5" wider rear baja guards then standard. the type with no rear tail lights fitted?

matberry - February 11th, 2012 at 08:50 PM

Yep, I do. I have molds so can get them made

scot70wagon - February 11th, 2012 at 08:53 PM

mat do you have pics. just need to make sure they are the same as i have now. i am trying to cover some 295 wide 15s.

matberry - February 11th, 2012 at 09:11 PM

They won't be the same as you have now, these are custom ones I made. I can get a pic or measurements

scot70wagon - February 11th, 2012 at 09:16 PM

pics would be awesome thanks bro

matberry - February 11th, 2012 at 09:48 PM

This was during construction, but you get the idea. It's hard to get a pic at the moment as the car isn't mobile and access is awkward presently.

Smiley - February 12th, 2012 at 10:41 AM

Hey Matt. Are these similar to a Cheetah kit? Cause the rear guards look that way?

Do you have molds for all the panels of a Baja kit? I might be chasing some new panels within a year or so :D


Smiley :)

matberry - February 12th, 2012 at 11:05 AM

Quote:
Originally posted by Smiley
Hey Matt. Are these similar to a Cheetah kit? Cause the rear guards look that way?

Do you have molds for all the panels of a Baja kit? I might be chasing some new panels within a year or so :D


Smiley :)

Hi Dan, the pic is during construction, the front is still before mods, they are similar to the Cheetah with the squared off edge, but mount higher up the body (altho they use the og mounting bolts).
They are MUCH bigger though, the car pictured has 5x5 arms with 37 x 16" BFG Muddies......
I made the moulds but only have the two rears and a matching one piece bonnet (same as Nilza's front) I also have a mould for a std size 1 piece baja front. The std Cheetah moulds were at Custom Vee Dub not that long ago. I discussed restoring them but not happened yet....

scot70wagon - February 12th, 2012 at 08:04 PM

mat, they seem to be exactly what i am after. do you have a pair already made or do you need to make a pair up.

matberry - February 12th, 2012 at 09:02 PM

I have the moulds only. I would need a deposit to get the ball rolling. Give me a call or PM for details.

scot70wagon - February 12th, 2012 at 09:04 PM

will give you a call mat, cheers