Board Logo

Removable apron
grazza7755 - July 10th, 2012 at 04:31 PM

After years of struggling, I finally drilled out the apron spot welds.
Now engine removable is easy.
It would have been a great idea for VW to make the aprons removable.
Thanks for the threads about this.
Grazza

donn - July 10th, 2012 at 04:34 PM

Nope, I'm not asking the obvious :D

Joel - July 10th, 2012 at 07:16 PM

Mmmm, somethings not right, can't quite put my finger on it, but I think that Honda Firefighter has the wrong fuel cap...


Jokes aside, did you used to take that to Valla back in the 90s?

RISKY4LIFE - July 10th, 2012 at 07:32 PM

LMAO way to funny

vlad01 - July 10th, 2012 at 08:42 PM

hmmm seems legit? carry on.

Shuffs - July 11th, 2012 at 07:42 AM

Hope that gearbox has four reverse gears and one forward :crazy:

57 Chook Shed - July 11th, 2012 at 07:56 AM

Hey has anyone noticed that the engine is in the wrong end? That's the front isn't it. Too confusing.

57 Chook Shed - July 11th, 2012 at 07:59 AM

Also the steering column looks bent and the alternator is like a coil.

bajachris88 - July 11th, 2012 at 08:06 AM

Variable camber front suspension!! :tu:

Shuffs - July 11th, 2012 at 08:37 AM

I was wondering if this is your next project?

http://www.broombroom.com/photos/meblog_back-to-front-car0309.jpg

matberry - July 11th, 2012 at 09:29 AM

:crazy:

Joel - July 11th, 2012 at 09:31 AM

http://images1.wikia.nocookie.net/__cb20100828054703/uncyclopedia/images/b/b5/Exploding-head.gif

grazza7755 - July 11th, 2012 at 09:35 AM

Joel,

You are showing your age.
It was at Valla about 20 years ago.
It was built in the 70's so is almost a part of Australian VW history.
I have pulled it apart to give it a birthday for this year's Valla.
Hope I get it finished in time.
Grazza

Joel - July 11th, 2012 at 09:41 AM

Only early 30s so wasn't that old but do remember it well, something like that really stands out from the pack.
would be great to see it again.