Who else is still working on their car getting it ready for Valla?
I was meant to clean my baja today but destroyed the internals of the steering box so I've spent the afternoon replacing that instead.
I'm leaving Thursday morning and I still need to replace my rear brakes, rear wheel bearings, and probably raise the rear suspension and notch the
springplates too. Going to be some busy afternoons this week cause tomorrow I'm heading out offroading again, lets see if we can break something else
Surely I'm not the only one doing this at the last minute, nothing motivates like a deadline!!!
So what are you all doing to your cars?
Will see you all at Valla!
Smiley 
smiley what steering box are you using? i cant remember who it was but some one mentioned that they were having issues with a repro steering box?
ps i wish i was going to valla!!! good luck with your work 
I hear you! Just fixed all my throttle linkage in side the cab on my bus today so hopefully evrything is good just got to start getting some spares together and i should be right to
| Quote: |
| Originally
posted by 69bug smiley what steering box are you using? i cant remember who it was but some one mentioned that they were having issues with a repro steering box? ps i wish i was going to valla!!! good luck with your work |
I am still working on my ghia, a new 2275 with external oil cooler, thermostat, new interiour, complete the wiring , run the engine in and complete the first service before we leave
still need to clean, check and adjust the bug. plus pack and make sure i have enough beer. ill be there saturday peoples.
| Quote: |
that falls under clean
Still working on the Baja. But the airlocker is in now
sitting drinking beer watching rock whiz thinking of doing something in the shed on my vw's for Valla..
does that count? 
Just replaced the oil lines to my external cooler, adjusted the tappets, and gave it it's 630,000km oil change (not original engine).
Still have to drive to Inverell tomorrow night, clean a lot of bits & pieces on the car each afternoon during the week, then drive back to Port
Macquarie on Friday night and probably clean bugs off it again, before meetin our local VWs at the Dennis Bridge (Hastings River) on Saturday morning
and driving to Valla for the procession to Nambucca Heads.
Other than than just loaf around I reckon.
| Quote: | |
Originally
posted by grumble
|
Heh heh - not much - just painting !!!
Took mine for a drive yesterday to make sure the battery is charged and all is going good after the new clutch and clutch fork fitted the other week.
Hi
Borrowing my mates car trailer to tow my sons bug up, he's racing at Raleigh, 3 people going up and his bug is a 2 seater so rather than take take 2
cars I thought it would be better tow it up.
I promised the owner of the trailer that I would repack the wheel bearing before leaving, it has electric brakes so I need to fit the brake controller
I bought on eBay 18 months ago to my wife's Prado.
I need to give my sons bug a wash and set the valves.
Steve
Packed my Engle with beer..... oh how feckin nice
still building a removable roof for the manx, and leaving on Thrusday morning. eeep!.
hope its sunny and won't need it!
Just a few things to check, if not sorted I'll leave have to leave the beetle at home and take an R32 golf instead.
Fitted new window reg a couple of weeks ago and fixed horn and hopefully have the lights sorted,
Only thing to fix now is my arm, not sure what has happened but it's swollen and can not bend my elbow or lift anything so hopefully a visit to the
dr's will sort it.
Leaving Sydney Friday morning.can someone give me the details of the track,if we get there in time it would be nice to have a look.
I'm putting in a new beam and spindles....I've already fitted a deep sump, changed oils and adjusted valves.
still sitting drinking beer watching telly
might look at my ride tomoro..
plenty of time
Raleigh Race way has directions on the web site
http://www.raleighraceway.com.au/location.html
Thanks
Fitting new front seats, trialling new wheels and tyres to see if they'll fit, grease front end, remove seats, fit bed and adjust steering box, sort electrical gremlin!!This is all on the to do list for Monday!
Well yesterday was a beautiful day and managed to get the painting all done (4 guards, bonnet & deck lid).
So now all that's on the list is reassembly, some quick trailer mods, fluids check, tappets and change wheels & tyres... plus doing the usual 9-5
of course... may even squeeze in some time for a cut & polish !!!
Hi,
I have been doing some work on the cabrio still not ready for rego but I will be trailering it down for the weekend on Friday and see if someone wants
it more than me for the right money.
New King and Link Pins with drop spindles, 4 wheel drums now discs replaced or recod all brake lines. New Dual Cisruit Osize Mastercylinder, New HB
Cables, Check all wiring and compelte 6 to 12V conversion, nearly ready.
Oh and fit Fuchs replicas and new tyres!
See you there,
Enjoy
David
washed one vw this arvo.. getting there
perfection should never be rushed paully
Got the Oval regoed today but still a few things to do to it before Friday morn.
Alternator is tomoz job!
All set now just need to pack over the next few days. Been up to Matt for a few final adjustments etc and can't wait I THINK!!!!!!!!!
Cheers Ian