Board Logo

[FS - NSW]Porsche 914 price drop
boof2332 - January 10th, 2007 at 05:14 PM

Hey All,

Due to the amount of projects on the go, and the fact that I will not fit in it(too tall), I am selling the 914.
It has the subaru twin turbo ej20tt and box, however will seperate if required. The radiator is not in so the front has not been cut to accomodate.

It is a complete project that requires finishing. The body is perfect..no rust, no dents and at present in black metallic, which was being rubbed back for final coat. It is complete, with new lights, interior and everything except rubber kit to put back together.

The motor is fitted with a modified 5 speed suby box, just needs pulling to put in the brass button clutch. The whole subaru harness from the running front cut has been laid through the car and the subaru steering column and shifter fabricated in. It selects gears perfectly through custom linkage set up.

Best to call me so I can explain the rest.

$7000 or $5000 with no motor or box.

Will post some llinks to pics.

0416 115 993

Matt

[ Edited on 20-1-07 by boof2332 ]

[ Edited on 14-4-07 by boof2332 ]

[ Edited on 14-4-07 by boof2332 ]


boof2332 - January 10th, 2007 at 05:19 PM

A couple of pics...
http://www.thesamba.com/vw/forum/album_page.php?pic_id=234200 
http://images.thesamba.com/vw/gallery/pix/234203.jpg 
http://www.thesamba.com/vw/forum/album_page.php?pic_id=234201 

matt


greedy53 - January 10th, 2007 at 05:38 PM

ooooohhhhhhhhhhhh nice


Kai.A. - January 10th, 2007 at 10:14 PM

aaargh!!!!

6 months ago i would have bought this instantly!

but, unfortunately, situations change.... i'll just have to build one of my own one day.

good luck with the sale!

kai


boof2332 - January 15th, 2007 at 11:44 PM

I can finish it to any level if required..ie track car or registered, paint or just running.

Matt


boof2332 - January 21st, 2007 at 07:37 AM

No one wants a mid engine track/street beast??

Can seperate box and engine if someone wanted it original.

matt


Grey 57 - January 21st, 2007 at 08:03 AM

RHD or LHD ???

4 stud or 5 stud wheels?

whats missing to put it back to stock


XXX-1.8T - January 21st, 2007 at 11:59 PM

how much without engine and box?


boof2332 - January 22nd, 2007 at 05:52 PM

Its Right hand drive. It is 5 stud on the front. it needs the piece that was cut out of the back rewelded back in...its there, and the piece of the tunnel that was cut to facilitate the subaru shifter. The rear trailing arms have been modified to take the subaru drive shafts, although it has a spare set of stock ones that can go back on.

It has new fuel tank and assorted other bits. have old gauges with it too, and disc brakes etc.

With all the subaru stuff removed I would want $6000.

Its totally rust free!

Matt


boof2332 - April 15th, 2007 at 09:17 AM

bump