Aussieveedubbers - Powered by GaiaBB

Wanted - panel van

Dozza - February 25th, 2007 at 03:48 PM

looking for a panel to restore, pref in qld or N NSW..... will consider any condition.

anyone got one they want to unload?

cheers

DoZZa

beerdoc - February 25th, 2007 at 04:11 PM

Something like this

Dozza - February 25th, 2007 at 04:16 PM

prob not a splitty... just a bay...

StenGuns - February 26th, 2007 at 07:49 AM

I have a 71 dual cargo door van.. Not only is it a desirable "low light" but it is quite rare to find these with the cargo doors either side.. Other "unique" feature to this panel is that it is a "walkthrough" rather than a "bench seat".. It appears to have been a drycleaners van..

The van is totally original.. Needs work but in surprisingly good shape.. U2U me if your interested..Rob

wiseoldub - February 26th, 2007 at 08:37 AM

can i please get your phone no. as this would be great for a mate of mine. looking for just this!!
cheers josh 0414 726194

ColumBUS - February 26th, 2007 at 03:04 PM

talk to frenzix, pretty sure he has a 74 panel up for sale in byron? would be an awesome ride. if he doesnt respond on here look out for him on the dsk website

Dozza - February 26th, 2007 at 07:13 PM

yeah - spoke to him - he sold it..... thanks though

whatnow - February 28th, 2007 at 04:14 PM

hi 72 bay? walk through, lots of dents but minimal rust (front floors only) plus the pass side windscreen corner is starting to go/gone.
the dent in the rear right corner is the worst as it has pushed in the hatch frame (note the split in the panel joint in the 3rd pic)

mech? will need engine and brakes

edit. it has an F cased (1300) motor with DP heads and LOTS of endplay. the brakes were partially disassembled by the PO.

$1000

i've got 40 or so photo's inc underside etc but forgot to take an overview.

located in armidale (northern table lands) nsw

u2u if you are interested or for more info/pics.

henry roberts.

02 6772 9517

edit. i should say by lots of dents i mean both rear corners, at the seam 2/3 of the way along the drivers side, there is a wave in the roof, the cargo floor is beaten up, a scrape on the sliding door track cover, numerous smaller dents, plus from memory a mark in the nose or the drivers door.

the car has a lot of surface rust underneath but i saw nothing serious.
the nose, gutters, sills, doglegs, outriggers, battery tray. rear corner bottems, doors and hatch are good.

[ Edited on 28-2-2007 by whatnow ]

whatnow - February 28th, 2007 at 05:37 PM

some more pics:

LHS sill

RHS sill

rear corner

okrasa power - February 28th, 2007 at 07:02 PM

have a 74 panel no motor needs some work very solid, otherwie complete $600