have a 67 ts fastback pretty much pulled apart but most parts are there except hood lining , shell is very good for a type3 only minor rust bits hence the $$$.
i also have popouts and either a 1600 twin port motor (needs 1 guide re-fitted) or twin carb 1500 single port.
can fit either irs and late model type3 box or swing with small 4 or wide 5.
Have full set of orig wide 5 rims and hubcaps wrap around ind and reflectors and lowbacks which could use a retrim .
pan is a rust free 72 with the early slide mounts supplied .
klaus 0428 427 986 $1000 ono wollongong
CUTTING UP LET ME KNOW IF YOU NEED PARTS OR SHEET METAL. ALSO 64 NOTCH AND HEAPS OF LATE PARTS.

its a bit grotty as its been used as a storge unit , I can also include spare panels int and bits n pieces. along with any rust repair bits needed. if its too much make me an offer.

hey auto or manual,is all engine tin ware included and how soon do you want it gone
thanks reb

manual , either motor is complete and trust me i have plenty of spares , not in major rush but sooner the better .
swapping pans at the moment and found some rust in the roof gutter so will patch that to stop it going any further.
I'll post pics of the car without any guards on if you want , should mention that roof has dents forgot as it always has had the rack with parts piled on it.

yeah 12 cars is too much for my yard , and 5 type 3 floorpans .... skip bin time ... ha yeah right hard enough throwing something busted out.

How much for the rear lenses and light fittings and the front bumper ?
Tom

$80 for a pair of rear lights inc bases +postage
up to $150 for rear bar , bar may have dents and surface rust . not easy finding decent ones.