Board Logo

[FS - VIC] wrecking early type 3s
zebvw - March 6th, 2011 at 08:46 PM

Hi guys im picking these up tomorrow they are complete they have a bit of rust both are 1500 single carb manuals (i only have a small yard so i will be wrecking them pretty quicky so let me know what your after and ill see whats there cheers zeb 0439 412 186 - Ballarat

zebvw - March 6th, 2011 at 08:48 PM

and the other 1

OLLY - March 7th, 2011 at 04:52 AM

Ya zebvw keen for a dash if any in good nik front bumper as well.
will ring today round noon.

thanks oll

scot70wagon - March 7th, 2011 at 08:10 AM

hi mate i,m after a set of early full length arm rests. cheers scot 0414 881 084

zebvw - March 7th, 2011 at 05:45 PM

Quote:
Originally posted by scot70wagon
hi mate i,m after a set of early full length arm rests. cheers scot 0414 881 084


no just the small armrests mate

NCH-003 - March 7th, 2011 at 07:26 PM

If it has the push button panel for the lights and wipers would be interested in the whole unit.
Cheers

zebvw - March 7th, 2011 at 09:18 PM

Quote:
Originally posted by NCH-003
If it has the push button panel for the lights and wipers would be interested in the whole unit.
Cheers


sorry they arent push button dash

TICK - March 8th, 2011 at 09:43 AM

rear window rubber and chrome , carby

zebvw - March 8th, 2011 at 08:22 PM

Quote:
Originally posted by TICK
rear window rubber and chrome , carby


I dont want to separate the carby from running engines. Window rubbers stuffed but crome there.

zocstar - March 8th, 2011 at 09:48 PM

Sooo.... What is there that you want to part with?

zebvw - March 9th, 2011 at 03:27 PM

Quote:
Originally posted by zocstar
Sooo.... What is there that you want to part with?


everything but what is the point of pulling a carby off a good motor and getting $20 for it then not being able to sell the engine

57 Cal look - March 9th, 2011 at 06:54 PM

Hi Zeb, sent you a text message to your mobile.

My names Finn, I'm in Adelaide 5083. I'll take both sets of spring plates and covers, just let me know a price and what postage will cost. Would you consider $20 a set fair? that what i paid for the last set i picked up. plus postage on top.

Also i would be very keen on a complete push button set up if there is one available.

Please let me know what you can do..
Cheers,

Finn

zebvw - March 9th, 2011 at 07:07 PM

Finn,

As we discussed in the sms it will be a few weeks before I get them off (only have one set) I will contact you when I have done this. $20 plus postage will be fine.

Sorry not push button dash boards.

zebvw - March 9th, 2011 at 09:14 PM

i have the following items

1500 single port runs well $450
1500 single port twin carby (needs exhuast) $450
1500 swing axle gear box x2 $200 ea
two full interiors red 1 good 1 ruff
assorted panels

TICK - March 9th, 2011 at 10:02 PM

under stand , thanks

vlad01 - March 13th, 2011 at 07:05 PM

what kind of sill kick plates has it got?

oh and rear view mirror? any good?

zebvw - March 14th, 2011 at 06:17 PM

Aluminium Sill Plates and yes have a good mirror.

vlad01 - March 14th, 2011 at 07:16 PM

pic of the mirror?