[Wrecking - QLD] 1963 Type 3 notch (push button dash)
NUG637 - March 13th, 2011 at 09:11 PM
to much interest in parts so im gonna part it out...
Im in brisbane queensland 4154 and i can offer courier to most people on the east coast between brisbane and melbourne, obviously for abit of donation
to the fuel cost
Pm me or phone me on 0408-982-892
Thanks for your time,
Myles.
NUG637 - March 19th, 2011 at 10:26 PM
now wrecking,
so far sold, dash
engine
box
brakes
gear nob
id plate
pop out windows
tow bar
roof racks
and a few bits and bobs
vlad01 - March 20th, 2011 at 12:02 PM
can I have some pics of the interior mirror?
NUG637 - March 20th, 2011 at 08:13 PM
sure, should have them for you tomoro
vlad01 - March 21st, 2011 at 08:09 AM
thanks
patina - March 21st, 2011 at 04:53 PM
i need a boot pull
NUG637 - March 23rd, 2011 at 09:29 PM
Quote: |
Originally
posted by vlad01
can I have some pics of the interior mirror?
|
As requested
NUG637 - March 23rd, 2011 at 09:31 PM
Quote: |
Originally
posted by patina
i need a boot pull
|
where you situated
vlad01 - March 24th, 2011 at 07:48 AM
eeeew. the mirror look nasty, looks like its got a lot of corrosion pitting?
what it the head of the mirror made of? stainless or aluminium?
Stanley - March 24th, 2011 at 08:33 AM
Can I have first dibs on the rear b/bar....how much?
NUG637 - March 24th, 2011 at 12:34 PM
Sorry mate, taken, front still there without overriders
NUG637 - March 24th, 2011 at 09:23 PM
Quote: |
Originally
posted by vlad01
eeeew. the mirror look nasty, looks like its got a lot of corrosion pitting?
what it the head of the mirror made of? stainless or aluminium?
|
little pitted, covered with house paint- thinners fixes that tho,
think the head is stainless
vlad01 - March 25th, 2011 at 06:42 AM
My plan is to replace the head on my mirror since the plastic turned to dust when I touched it.
Stainless should/will clean up. Other questions is the mirror got any damage to the backing? ie. black spots behind glass.
can you pop out the stem? so hopefully it can fit on my stem, thus fitting late type 3.
Im yet to find NOS late mirror so I am looking at my options.
I could just buy CSP billet aluminum head thats fits most VW stems even type 3
NCH-003 - March 25th, 2011 at 08:18 PM
I believe the head is aluminium as mine is the same.As for poping it off i would not even try too...
VW-VARIANT-L - March 25th, 2011 at 10:11 PM
Quote: |
Originally
posted by vlad01
My plan is to replace the head on my mirror since the plastic turned to dust when I touched it.
Stainless should/will clean up. Other questions is the mirror got any damage to the backing? ie. black spots behind glass.
can you pop out the stem? so hopefully it can fit on my stem, thus fitting late type 3.
Im yet to find NOS late mirror so I am looking at my options.
I could just buy CSP billet aluminum head thats fits most VW stems even type 3
|
If you're patient you'll find a good used correct year late one, even with the dimmer switch
vlad01 - March 26th, 2011 at 08:05 AM
used is not really an option I don't think, has to be perfect to satisfy me.
NOS yes that would be good. but........... looks to be NA.
vlad01 - March 26th, 2011 at 08:10 AM
ISP mirror new! hmmm $125 and always out of stock? Never been in stock since I registered on their site this time last year.
NCH-003 - March 27th, 2011 at 05:38 PM
If no one wants the mirror i'll take it......
bushed - March 27th, 2011 at 09:52 PM
pulling a 70 sqre has mirror if u want
Quote: |
Originally
posted by VW-VARIANT-L
Quote: | Originally
posted by vlad01
My plan is to replace the head on my mirror since the plastic turned to dust when I touched it.
Stainless should/will clean up. Other questions is the mirror got any damage to the backing? ie. black spots behind glass.
can you pop out the stem? so hopefully it can fit on my stem, thus fitting late type 3.
Im yet to find NOS late mirror so I am looking at my options.
I could just buy CSP billet aluminum head thats fits most VW stems even type 3
|
If you're patient you'll find a good used correct year late one, even with the dimmer switch
|
vlad01 - March 28th, 2011 at 08:21 AM
how is the plastic? does it powder when scratched?
vlad01 - March 28th, 2011 at 08:26 AM
Quote: |
Originally
posted by NCH-003
If no one wants the mirror i'll take it......
|
sure you can have it. I try asking ISP if they have any new ones.
Fully restoration, I am reluctant to use anything 2nd hand.
European blood mate Everything has to be done right regardless of cost.
unlike 99% of Aussies
NUG637 - March 28th, 2011 at 08:55 AM
Cool story
Mirror is still there for anyone who wants it,
First in best dressed for parts now... Don't ask me questions like if it will work/fit my car or not that's your problem.. So don't enquire or
request pictures unless you know it will fit/work on your car please... :wink:
vlad01 - March 28th, 2011 at 10:16 AM
sorry I have a habit of doing that. Kind of hard unless I have it in my hands to look at.
lol I did that to a guy selling brand new H4 hella head lights for $75. I was extremely weary of 2 year old NOS after market part
even if it was German made.
In the end he yelled at me to stop asking questions, So I didn't buy it
NUG637 - March 30th, 2011 at 08:05 AM
The front seats are In great condition still got them sitting here, this things gonna be going to scrap metal soon so speak up or forever hold your
peace
shaven - January 25th, 2012 at 12:54 PM
Quote: |
Originally
posted by NUG637
The front seats are In great condition still got them sitting here, this things gonna be going to scrap metal soon so speak up or forever hold your
peace
|
NUG... are these still around?
matty
5lam - January 25th, 2012 at 03:02 PM
Is that a water bag mount on the front, and is it for sale?
dragsters for life - January 25th, 2012 at 03:08 PM
Quote: |
Originally
posted by shaven
Quote: | Originally
posted by NUG637
The front seats are In great condition still got them sitting here, this things gonna be going to scrap metal soon so speak up or forever hold your
peace
|
NUG... are these still around?
matty
|
i have seats if you need them matty
type3disease - January 25th, 2012 at 04:23 PM
i need a pair of lowbacks if they're just sitting round... no hurry thou...
for the race notch...