Board Logo

[FS - NSW] 1969 TYPE 3 SQUAREBACK
RighteousK - December 23rd, 2011 at 12:12 PM

For images go to: http://www.kombisales.com.au/kombi-for-sale/1969-vw-type-3-squareback 

This is a 69 model type 3 so has late running gear but still the nice looks of the early models. This would make a great first project for someone as a lot of the work has already been done. No welding is required and it is already in primer and half rubbed down. Not much work to get it in paint and put it back together and it'll nearly be ready to be registered.

It runs and drives well and the brakes, steering and suspension all appear to be good. All it needs is a new handbrake cable and a leak fixed in the exhaust.

Comes with most of the parts to put it back together, if not all, I haven't really checked.

Call Jared on 0413-262-932
Location: Calga, NSW Central coast (Near Kariong)
Price: $1,500

buzz - December 23rd, 2011 at 07:15 PM

if only you was in tas :(

RighteousK - February 9th, 2012 at 01:41 PM

Price revised to $1,500. It's got to go, I have no time to fix this.

Did I mention is does run and drive quite well and shouldn't take much work to get it on the road.

shaven - February 9th, 2012 at 02:18 PM

Quote:
Originally posted by RighteousK
Price revised to $1,500. It's got to go, I have no time to fix this.

Did I mention is does run and drive quite well and shouldn't take much work to get it on the road.


who did the rust / panel work?
has it all gone? the centre side windows are they pop outs or fixed?
what does the inside look like? under the bonnet & with the rear hatch up?

RighteousK - February 9th, 2012 at 02:32 PM

Hey mate. If your interested, pick up the phone and call me and I can answer any questions. Cheers, Jared

shaven - February 9th, 2012 at 04:33 PM

Quote:
Originally posted by RighteousK
Hey mate. If your interested, pick up the phone and call me and I can answer any questions. Cheers, Jared


it was also for other ppl Jared... just helping as well.:kiss:
calling:lol:

RighteousK - February 9th, 2012 at 05:20 PM

Sorry mate. Nice chattin to you though. As I said on the phone, the bodywork was done by the guy I bought it off, there is probably a little bit of bog in it but it looks to be not a bad job. The worst of the rust is in the floor where the battery is might need a plate welded in.

I have posted some more photos of the interior to my website. Sorry that they aren't very good, all the parts are in it at the moment as I have nowhere else to keep them.

shaven - February 9th, 2012 at 06:10 PM

thanks jared... mate good to chat. hope all goes well with it