Board Logo

[FS - NSW] 1975 ex-PMG Panel lowered
hypo-vw - June 29th, 2012 at 05:49 PM

I have for sale my 1975 1600 PMG panel-van . Very straight body with minimal rust , excellent example of a very rare unbutched panel . Will sell as is or I will have a few minor rust repairs completed ready for rego . Excellent sills , chassis , roof , pillars and doglegs . small amount of rust in front inner apron and front outer nose panel up near LH indicator as the original windscreen seal is still fitted and the previous owner thought the easiest way to fix it is to insert rubber door stops into the gap where the seal had shrunk at the top , then fill it with plastacine ( due to this the front screen has been leaking and a small amount of rust has developed ) . Genuine 2 owner car that runs absolutley beautiful . Very quiet engine and transmission .

new lowered adjustable front beam
adjustable front bump stops
new lower front shock bushes
new upper German balljoints
new lower German balljoints
new steering drag-link
new steering idler pin & bushes
new steering damper
machined front brake discs
new front disc pads
adjustable rear springplates
type-1 rear bump stops
new rear German hydraulic brake cylinders
new rear brake shoes
machined rear brake drums
new LH handbrake cable
serviced RH handbrake cable
serviced brake adjusters
new BRM alloys
new GT radial tyres
engine serviced
all new fuel hose & filter
exhaust replaced with extractor & quiet muffler
flanges welded onto heater boxes
new engine bay seal
new front gearshift rod bush
new front screen seal
Mechanically excellent

$10,500 as is or $12,500 with NSW rego Wayne 0419-481461


hypo-vw - June 29th, 2012 at 06:34 PM

more pics