Board Logo

36 mm Weber manifold
Grasack - December 29th, 2012 at 08:31 PM

Does any one know where to get twin manifolds for 36 IDF webers ?
These are for the dual port head
Any idea of cost?

tar76 - December 29th, 2012 at 08:49 PM

Mate same as 40mm idf manifolds. Try Rod Penrose thats where i got mine for my 36 idfs

waveman1500 - December 30th, 2012 at 01:32 PM

Most Weber IDF manifolds are 48mm diameter, which is a lot bigger than you should have for 36mm carbs. Try and get some manifolds which are genuinely 40mm internal diameter, and that will be close enough.

matberry - December 30th, 2012 at 01:42 PM

^^ The only true 40mm manifolds are made by CSP and stocked by Vintage 02 97891777

RodPenrose - December 30th, 2012 at 03:40 PM

Grasack , I have about 300 used manifolds here priced from $ 70 a set . These are available in 38mm , 40 , 45 and 48mm diameter openings to suit the IDF and DRLA carbs . I also have new manifolds here priced from $ 130 a set if you want to go this way . These are available in many different styles and I would need to know what type of linkage you have . I can also supply a linkage if necessary , ROD , 02-42729920 .

13bwagon - December 30th, 2012 at 06:53 PM

rod has everything :)

Grasack - December 31st, 2012 at 07:19 PM

Thanks everyone for your input
I will contact Rod in the new year and see how we get on
Happy New Year to all