Hi Guys
I am having trouble figuring out how to install the anti rattle bushing in a 1974 steering column as I can't seem to locate a good exploded diagram
of where it actually sits. Currently there is not one installed and someone else has simply wrapped some electrical tape around the column shaft!
Regards
Greg
have a read here and then contact Joel
http://www.thesamba.com/vw/forum/viewtopic.php?t=471141
Believe this is the bit
http://www.justkampersaustralia.com/shop/top-support-ring-for-steering-tube-v...
Hi Greg
What model steering column is in the car?
Steve
Quote: |
1974 model steering column in a 1967 beetle.
Regards
Greg
Supers and standards use the same steering column setup, its just the length that varies.
The plastic bushing sits between the shaft and the bearing.
on a 74 there is the anti rattle bushing then a grey plastic sleeve that slips down over it before the steering wheel is fitted.
Thanks Joel
I have it coming in with some stuff from CIP1 and will let you know when I install it.
Thanks
Regards
Greg
Hi Joel
Do you happen to have an exploded diagram of the 1974 steering column so I can see where everything goes ?
Regards
Greg
Hi
Ive had a few plastic bushes fail, so Ive made new ones out of some thick plastic.
Steve
topline have a lot of super bug parts.
http://toplineparts.com/index.php/new-hot.html
.
Thanks Ian,
I've ordered a new bush from CIP1 and will hopefully get it in the next week or so.
Regards
Greg
Quote: |
Thanks Joel