Board Logo

Anyone fitted CB Performance EFI Turbo in OZ
Camo - March 24th, 2013 at 04:20 PM

Hi all,

I know there has been bits and pieces from the CB Performance turbo kits for sale here in Oz.

Wanting to know if anyone has purchased the complete kit and fitted it out here.

Just after some local independent feedback, thanks.

Kev

P.S. No DB replies or comments required :lol::lol::lol:

11CAB - March 24th, 2013 at 04:54 PM

Pretty sure one of the Manxes up here has one of those kits fitted

nbturbo - March 24th, 2013 at 07:05 PM

I have fitted their latest system to my Drag Car which is set up to run Turbo/ Methanol.I have started the motor on a program that CB loaded into the ECU and had a local bloke set up the cam and crank angle sensors - it is all good so far.The whole system is absolute top quality.The wiring loom is all waterproof connections with heat shrink on everything and plenty of wire length and everything is clearly marked.The bloke doing my tuning is really impressed with the quality of everything and likes how they have set up the tuning side of things.It has good data logging built into it.I am taking it back soon to put it on his dyno to fine tune it.

DylanTheDubber - March 24th, 2013 at 07:08 PM

Not as of yet but i plan too in a few years when i am permited to drive Turbo Vehicles :)

From Dylan

Camo - March 24th, 2013 at 08:45 PM

Quote:
Originally posted by nbturbo
I have fitted their latest system to my Drag Car which is set up to run Turbo/ Methanol.I have started the motor on a program that CB loaded into the ECU and had a local bloke set up the cam and crank angle sensors - it is all good so far.The whole system is absolute top quality.The wiring loom is all waterproof connections with heat shrink on everything and plenty of wire length and everything is clearly marked.The bloke doing my tuning is really impressed with the quality of everything and likes how they have set up the tuning side of things.It has good data logging built into it.I am taking it back soon to put it on his dyno to fine tune it.


Thank you for that and pleasing to hear. I think it's a lot better to get feedback from people here and unrelated to them. You will always here some good and bad about any product as you cant please everyone.

Thinking about going this route before lashing out and doing the full Subaru conversion as it will be a lot cheaper and easier. I had always said to myself from when I first got my car back on 2007, that I would rather blow others away with VW power so I should also stick to my original plans :yes:

Cheers, Kev

vwo60 - March 25th, 2013 at 07:57 AM

Mark at crankshaft engineering in Brisbane can tell you all about it, he has fitted one to a friend's car, he has nothing but praise for the system and the support on the tunning side through CB performance.

Craig Torrens - March 25th, 2013 at 02:03 PM

Hi Kev, Andrew is running the CB turbo kit.....maybe shoot him a pm :tu:

http://forums.aussieveedubbers.com/viewtopic.php?tid=83554&page=4 

Camo - March 25th, 2013 at 03:46 PM

Quote:
Originally posted by Craig Torrens
Hi Kev, Andrew is running the CB turbo kit.....maybe shoot him a pm :tu:

http://forums.aussieveedubbers.com/viewtopic.php?tid=83554&page=4 


Craig, you're a champion :tu:

Thanks for that, Kev