Board Logo

Better coil for MSD 6AL ignition
1303Steve - May 23rd, 2013 at 08:50 AM

Hi

The second MSD blaster coil has died on my sons car in about 3 years. The 1st just stopped working the 2nd developed a massive crack down the tower. Being a good dad I gave his Beetle a wash and the water arced out the the coil tower.

So I fitted my 40 year old Bosch GT40 and it was running again.

So my question is, what is good coil to use with a MSD 6AL ignition other than a MSD blaster?

Steve

Bizarre - May 23rd, 2013 at 09:02 AM

If it is the Blaster 2 coil that died - I have one that I am not using

I thought I was having trouble with my Bosch on the Scorcher set up and we but it in instead.
Turned out it wasnt the coil so I went back to the Bosch

I can bring it to the Nationals or to Frasers?

dangerous - May 23rd, 2013 at 01:18 PM

This is what I chose:
http://www.summitracing.com/parts/msd-8261/overview/ 

1303Steve - May 24th, 2013 at 09:56 AM

Hi

Barry can you bring it out on Sunday, what do you want for it?

Dave thanks for that I will look into getting one, we used a Crane coil on my sons Skyline http://www.summitracing.com/parts/crn-730-0891 

Steve

Peter Leonard - October 9th, 2013 at 11:59 PM

MSD 8252 or 8253 might be a better choice for a 6 series ignition.
You running a digital 7 Dave?

greedy53 - October 23rd, 2013 at 05:24 PM

I HAD A FUNNY THING HAPPEN TO MY GT40 A FEW YEARS AGO,i exploded while i was coming back from the airport oil everywhere what a mess,well needed to find out why well to cut a long story short the regulater was letting 32 volts out not the nice 12 vots,I was surprised that mor didn't get buggered
don't just love them