Board Logo

HP to run 13.5 in a bug
x275 - July 2nd, 2013 at 09:06 PM

I understand this is a rather broad question with many variables but as a rough guide, how much horsepower would it take to power a '71 superbug to a 13.5 second quarter ?

Cheers,
Conan


colin - July 2nd, 2013 at 09:22 PM

Quote:
Originally posted by x275
I understand this is a rather broad question with many variables but as a rough guide, how much horsepower would it take to power a '71 superbug to a 13.5 second quarter ?

Cheers,
Conan



I reckon around 140rwhp, a nice mildish 2332

Cheers Col


cnfabo - July 2nd, 2013 at 09:34 PM

Quote:
Originally posted by colin
Quote:
Originally posted by x275
I understand this is a rather broad question with many variables but as a rough guide, how much horsepower would it take to power a '71 superbug to a 13.5 second quarter ?

Cheers,
Conan



I reckon around 140rwhp, a nice mildish 2332

Or cols 1998cc:ninja:

Cheers Col


matberry - July 2nd, 2013 at 09:53 PM

My old 2332 with 140 rwhp ran a 13.0 in Cols stock but stripped out std early beetle with slicks and close ratio box. Engine was FK 87, 48 IDA's, 9.7:1 44x37 max ported 043's without welding.


modnrod - July 3rd, 2013 at 01:23 PM

6500rpm with a 1776 or 1915 and a 50-60HP hit.
:D


vw54 - July 3rd, 2013 at 01:23 PM

Lots of weight reduction for sure


Craig Torrens - July 4th, 2013 at 08:30 PM

put this in it !

http://forums.aussieveedubbers.com/viewtopic.php?tid=102651 


cnfabo - July 4th, 2013 at 10:14 PM

Quote:
Originally posted by Craig Torrens
put this in it !

http://forums.aussieveedubbers.com/viewtopic.php?tid=102651 


Rod loves the torque of that engine


andrewmurphy - July 6th, 2013 at 12:33 PM

2275 N/A with 137 at rear wheels tall gears (crossing finish line in 3rd 6500rpm) @95mph with 950kg including driver if I recall.