Just found this on another site and wondered if anyone hear had ever attempted it. Basically they did this back in 1973 on an air cooled porsche.

They spray water at the air cooling fan and the water vapors greatly cool the cylinders down via contact and also cools the air down.

Anyway, have a read and see what you think > http://forums.pelicanparts.com/porsche-911-technical-forum/150982-water-vapor-cooled-911-rubbermaid-solution.html

Obviously this is probably more related to turbo engines or very high compression motors. Maybe have it set up to start spraying at a set temperature.

Kev

turbo motors you spray the water inside the motor , into the inlet manifold keeps the carbon off the valves etc toooo

Quote:

Originally posted by ian.mezz turbo motors you spray the water inside the motor , into the inlet manifold keeps the carbon off the valves etc toooo

evaporative coolers work that way i guess it has to work

in the 80s we just plug the windscreen washer bottle in and let the motor suck it in

yes this would work well from what I gather.

I tried this before on high performance PCs, on external radiators into the fan and the temp drops a lot.

Also a proven technique on front mount ATA intercoolers on cars. Couple of water jet nozzles at the front sprays onto the intercooler. The air/mist mix is drawn through the intercooler.

Moist air has much larger heat capacity over dry air. Fine droplets hitting the surface and evaporating has an even greater effect on top of that as well.

A guy on here has done this, Modrod from memory.

I have done a spray setup onto the oil cooler............I have also done the same with my Evo X's SST (transmission) cooler, with great results

I'm also experimenting with water vapor cooling ventilated discs

I've never tried into the vw fan though, but it should work well.

So basically, a water cooled VW

I bought a kombi about 10 or so years ago, it had a irrigationfitting drilled in on each side, near the base of the fan shroud. it had head temp gauge and would knock close to 50'C off when turned on.
definatly works. just a pain to top up water all the time

Hi Kev
apart from spraying water onto Your cylinders and heads
which will turn into steam anyway when the engine is at a normal running temperature..
I think its a great idea..
have the water spray to a very fine mist so not using a lot of water.. Great on a 40C++ day...

another one above the driver would also be good... lol..

I read all the posts etc You mentioned Kev.. but as usual, some were talking about spraying internally [water injection] and others about external spraying... on intercoolers etc

One fellow said His engine had two water jets in the fan housing that sprayed onto the fan...
You can get adjustable garden plastic sprays and sprays for different spraying patterns [or degrees]... so, lots of things to try...
[I;ve already tried all the different sprays in My Wife's garden ]


I first heard about water sprays onto intercoolers. about 14 years ago, when watching Cars in the Australian Rally championship starting..... while waiting to Go, a Mitsubishi Lancer had water dripping from under the front of the car, I told the driver, who told Me that he had a tank of water in the boot, and he had switched on the water spray on the inter cooler..
He also had a big switch on the dash, that switched the idle speed UP... to 3000-4000rpm..??? I can't remember what it was.. maybe higher...??

Lee

PS: I thought those plastic bags that were made to carry water were a neat idea.. but they used 12 Occy straps to hold the bag down??? [elasticstraps with hooks on both ends] Lee

You don't want to gush alot in a hurry, as you want a consistant spray stream across the barrels and heads for even cooling.

You hear the stories of buggy guys driving a hot motor through water crossings and cracking the case due to the sudden change in temperature on 1 side of the engine (such as bottom side). The metal doesn't contract consistently from the uneven 'coolness' distribution.

What would be cool is a thermo-relay tapped into a cylinder head temp sensor. And i guess if you have it spraying into the fan inlet instead of directly at the cylinder heads, the fan will chew it up and distribute it evenly perhaps.

Yes,
it would need to be a very fine mist of water...
so, it behaves like air inside the fan shroud...

have You seen those pedestal fans that spray a fine mist of water?? I saw them last summer.. maybe at bunnings??
and the fine mist doesn't wet you either...
they only hold about a litre of water..

You would only need to spray water in the fan shroud when its about 33C or over...

LEE

Hi

The secret with any water spray is to have complete vaporisation of the water. So you need high pressure with a fine spray

Any moisture around the spark plugs would be a problem.

Steve

if you want the real mechanics of it google up "adiabatic cooling"
Actually you want "dry" adiabatic cooling
The finer and drier the mist - the better it works
We have used it on air cooled air conditioning systems for ages.

Yes - you can put a hose on your air conditioner but a dry fine mist works so much better

Wow my memory served my correctly for once.

Sounds like a great mod to me (that's been tested) for anyone planning on using their VW in this harsh enviornment.

Quote:

Originally posted by Camo Quote: Originally posted by Gracey Sounds like a great mod to me (that's been tested) for anyone planning on using their VW in this harsh enviornment. Thanks everyone for the feedback re this mod, but Gracey I was thinking on a turbo application when you reach the higher limits of your boost having a hobbs pressure switch turn the water on to aid in keeping it cool. I also still like the idea of water injection into the manifolds, serves a couple of purposes Kev