Aussieveedubbers - Powered by GaiaBB

Oil system breather box

hewpt - November 17th, 2013 at 11:54 AM

Has anyone got any suggestions for me, I want to put a new breather box on my 1835.

Bizarre - November 17th, 2013 at 12:03 PM

CSP or Berg are the best

I like hooking up to the carbs - others dont.
Drain back down to the rocker covers or if you have electric fuel pump. into the cover

The little cigarette box sized ones are a waste of money

hewpt - November 17th, 2013 at 05:38 PM

Bizarre, thanks for your reply, for the box I was thinking more along the DIY lines but the idea of using the old fuel pump block is a cracker.Does anybody make an adaptor?

Bizarre - November 17th, 2013 at 06:20 PM

are you running dual carbs??

hewpt - November 17th, 2013 at 06:22 PM

No just a dirty 40 dcnf

snitz - November 17th, 2013 at 09:38 PM

Hewpt..CB Performace sell a billet anodised breather adaptor that runs in place of your fuel pump block off.Fast Fab make one aswell which is sold through Airkewld. Both are probably from the same factory with one wearing a CB logo..Cheers Jason.

hewpt - November 18th, 2013 at 06:47 AM

Thanks for the info Chaps.