Type 2 into Type 1
Gracey - September 25th, 2014 at 01:44 PM
Hi,
I'm fitting a type 1 IRS box with type 2 output flanges into a 76 Bug.
Can I just change the stub axles and add type 2 drive shafts & CV's?
nils - September 25th, 2014 at 05:20 PM
Reasonably sure the flanges will go straight on, but the axles will be too long unless you are changing your arm length too.
Gracey - September 25th, 2014 at 09:38 PM
I'm not changing the length, so do type 1 axles fit type 2 CV's?
66deluxe - September 25th, 2014 at 09:45 PM
| Quote: |
Originally
posted by Gracey
I'm not changing the length, so do type 1 axles fit type 2 CV's?
|
Only when you have both sides of the centre splined part of the type 2 cv machined to type 1 cv width. I had this done to my type 2 cv's in my
beetle.
matberry - September 26th, 2014 at 05:35 PM
Yep, Damo's onto it, mod the cv's to fit the beetle axles
Gracey - September 26th, 2014 at 10:28 PM
Thanks guys.