play in steering box
clyve - November 25th, 2014 at 05:41 PM
Is there anyway to stop play between the input and output shaft on a squareback sterring box. And are they grease filled or oil?
Cheers all
Clyve
psimitar - November 25th, 2014 at 07:20 PM
Gotta be similar to T1 and T2 boxes so should have both worm and roller adjustment.
As I'm not familiar with T3 steering then I'd need a pciture to help any further.
grumble - November 25th, 2014 at 08:36 PM
They are similar to the T1 box so if the bushes or worm aren't worn out giving axial play it should just be a matter of adjusting.
psimitar - November 25th, 2014 at 10:03 PM
| Quote: |
Originally
posted by grumble
They are similar to the T1 box so if the bushes or worm aren't worn out giving axial play it should just be a matter of adjusting.
|
Worm bearing wear play can be reduced with the large locknut and grub screw. This one should always be checked before the roller is adjusted. 