Board Logo

syncro front 290mm disc rotors
PAZZAN - January 26th, 2015 at 01:05 PM

does anyone know what model mercedes the big brake kit for syncos is off I need new disc rotors and I am finding very hard to match the disc I have on the van, its about 290 mm dia hat is about 48mm ..I think the brake kit was a Oettinger kit..

1303Steve - January 26th, 2015 at 08:21 PM

Hi

Try doing a search on the DBA website http://www.dba.com.au/ 

MickH - January 26th, 2015 at 09:34 PM

Didn't they use Audi A6 discs???

psimitar - January 26th, 2015 at 10:50 PM

Use the Brembo online catalogue as you can search using disc dimensions instead of just looking for a manufacturer and model. Much more useful in cases such as yours.

PAZZAN - January 27th, 2015 at 05:56 AM

merc & audi are close but not the same,tried both catalogue dba & brembo no luck taking them down to dba office tomorrow at silverwater see what they can do :spin:

psimitar - January 29th, 2015 at 12:01 AM

So using dimensions in the Brembo was a no go? Did you try just using the diameter and width only so as to maximise findings?

psimitar - January 29th, 2015 at 12:02 AM

So using dimensions in the Brembo was a no go? Did you try just using the diameter and width only so as to maximise findings?

PAZZAN - January 29th, 2015 at 04:26 PM

YEP DBA said mitsubishi evo 294mm:spin: x 24mm are the closest to the specs so might try them just drill 112 pcd for vw :starhit: