Board Logo

blinkers
roach - February 5th, 2015 at 04:59 PM

When i was driving to work this morning in my 62 bug every time i used my blinkers they would flash twice and then just stop.The blinkers had stopped completly by the time i got home i bought a new flasher can you can hear it working in the nuetral position but when you move the lever L or R nothing happens.Any ideas anyone.thanks Tony

LUFTMEISTER - February 5th, 2015 at 06:26 PM

Bad earths or bulb blown in circuit.

psimitar - February 5th, 2015 at 07:51 PM

The flasher shouldn't be heard working when the stalk is in the neutral position. Possible dodgy stalk. If you find the 3 wires for the stalk then you can jumper between the Black/green/white to one of the others to see if the flasher relay and lights work properly. If they do then defo the stalk otherwise bad earths or faulty wiring.

roach - February 5th, 2015 at 07:53 PM

Thanks for the help will check it all out. Tony

roach - February 8th, 2015 at 06:24 AM

FIXED THANKS TONY:smilegrin: