Hey
have come to the point i am reinstalling the motor into my semi autromatic beetle and need to reconnect all the pipes stupid me forgot to take photos of everything so need a few pics etc of how everything connects up both wiring and pipes.
any help would be greatly appreciated
cheers
rhys

Rhys text me your mobile No and I will send some pics on the phone tomorrow, 0408 025 845 Cheers Les

Will do have you replaced the torque converter seal?

Yes the converter just slips back off the splines,the seal mounts on the hub on the flange outside of the splines. Be careful fitting the seal as it s easy to distort it,when you remove the converter measure the depth in the bell housing prior to pulling it out and when you refit it make sure it goes back in 3 steps to the same depth.