Aussieveedubbers - Powered by GaiaBB

regulator

clyve - November 25th, 2015 at 06:35 PM

Hello all
A question I have a 67 which I am making my own wiring, now the engine has an alternator and was wondering if I need to fit a regulator? The alternator has b+ and D? Terminals. Now I know there is probably a diagram for this but having trouble to locate
Many thanks
Sloth

vduboy - November 26th, 2015 at 10:06 AM

Google internal regulated alternator, that is what yours sounds like, the D terminal will need to go to a alternator light on the dash, B+ to the battery/fusible link to the battery

AA003 - November 26th, 2015 at 07:46 PM

Quote:

Originally posted by vduboy
Google internal regulated alternator, that is what yours sounds like, the D terminal will need to go to a alternator light on the dash, B+ to the battery/fusible link to the battery

That sounds good to me.

The B+ will be the 2 red cables from the generator wil need to be joined together.

clyve - November 26th, 2015 at 07:50 PM

I have no wires from the gen as there was no wire loom so read on a web site that the alt light is kind of a loop not sure if this right cheers