Hi team, wondering if anyone still around here can help me out. Building a 2109cc 76 x 94 and need to pick a cam to get it ordered. So far have

Autolinea case machined for 94's
Mahle p&b's
AA 76mm crank, lightened flywheel
AA 5.5-inch rods, which I will probably swap for CB x-rods
Scat 1.4 rockers
Empi GTV2 heads, 68cc, 42 x 37.5 valves, and manifolds
CB straight cut cam gear
CB 26mm oil pump
Jaycee pushrod tubes
Manton chrome-moly pushrods
Empi 44 or 48 IDF clones, still to be ordered, depending on cam

Want to win plenty of traffic light drags, while I am driving it through town on the few days a month I am able to. So not worried if its angry, as long as its driveable. Thanks in advance

Whitty

Rod Penrose Racing got various cam kits https://rodpenroseracing.com.au/285-camshaft-kits 

Maybe a call to him will get you a best fit.

Thanks Fossil, looking for some first hand experience if possible.

the Scat C35 cam is a good choice.
I have the C25 in my bus and it is great

That is a lot of cc's you have in those heads.

The Engle cams are also popular - but never run one.

The FK89 is a bit of a classic
https://vwparts.aircooled.net/SearchResults.asp?Search=cam&x=0&y=0