Board Logo

Pistons and cylinders
VWCOOL - October 17th, 2003 at 10:36 AM

I need to put new P&Cs on my Country Buugy engine - 1300cc. Are new ones still available? Or will I have to make it 15 or 1600cc? As long as they slip-in... approximately what will new ones cost me?

type82e - October 17th, 2003 at 09:23 PM

1600's will slip into the case but not the heads which would have to be machined.
or keep the originals and buy new 1600 heads which would be cheaper than having yours recoed and bored for the bigger cylinders.
marcel

vw54 - October 18th, 2003 at 07:01 AM

You can only buy 1600 pistons n barrells

lugnuts - October 19th, 2003 at 02:25 AM

You can still get 77s and NOS german 85.5 at Aircooled.Net http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=EPS0001&c... :thumb

11CAB - October 19th, 2003 at 11:36 AM

Have you tried our sponsors??
A couple of quick phone calls should get you sorted