Board Logo

Timming For 1600 twin port
Blue Bus - March 9th, 2004 at 09:19 PM

Hey guys just wondering whats the timming number when using a timming lightgun on a 1600 twinport, cause the car runs for a bit after turn off.
Any help would be great ta!:vader

vw54 - March 9th, 2004 at 09:39 PM

Check your point gap first of all then set the timming at 7.5 BTDC

1303Steve - March 9th, 2004 at 09:53 PM

Hi

If it has a dual vac dizzy set it at 5 ATDC.

1302Steve

Blue Bus - March 9th, 2004 at 11:37 PM

thanks guys will give that a go:thumb but what seting should the points be set at?:o