Board Logo

wiring prob (hot)
phatrat - May 15th, 2004 at 03:03 PM

negative battary lead hot.

gen cover hot

reg hot

any ideas?


seagull - May 15th, 2004 at 04:50 PM

I found the same once poor earth size and the bolt was rusty ,I ran a 10mm earth and a stainless steel bolt ground the spot were I bolted the earth lead .The regulator was in poor cod as well so I replaced it at the same time no probs after that .seagull


phatrat - May 15th, 2004 at 06:28 PM

Quote:
Originally posted by seagull
I found the same once poor earth size and the bolt was rusty ,I ran a 10mm earth and a stainless steel bolt ground the spot were I bolted the earth lead .The regulator was in poor cod as well so I replaced it at the same time no probs after that .seagull


This would explain a lot...cheers;)


phatrat - May 15th, 2004 at 07:59 PM

short in reg:cry