Board Logo

twin port heads question bolt holes ? photo
seagull - July 4th, 2004 at 07:25 PM

one the ends of the heads there are 10mm holes taped what are they for ? there cast in then taped
these are not the header bolts :alien

[Edited on 4-7-2004 by seagull]

OZ Towdster - July 4th, 2004 at 07:45 PM

can you provide digi photo

seagull - July 4th, 2004 at 07:55 PM

Yep off the shed now

[Edited on 4-7-2004 by seagull]

seagull - July 4th, 2004 at 08:07 PM

and this one ????

[Edited on 4-7-2004 by seagull]

1303Steve - July 4th, 2004 at 08:55 PM

Hi

There for a CHT sensor for EFI.

1302Steve

seagull - July 4th, 2004 at 09:46 PM

thank you steve :)

vw54 - July 4th, 2004 at 09:47 PM

Thats Cylinder Head Temperature Sensor for fuel Injected engines.

seagull - July 4th, 2004 at 10:06 PM

Dave are all these heads like these ? these would be late model correct .

vw54 - July 4th, 2004 at 10:17 PM

Most of the new ones you buy have these installed as there a universal head.

Old origional ones wont have them,

BiX - July 5th, 2004 at 10:12 AM

Would it be possible to use for a aftermarket CHT gauge? and would it give a simialr reading as the one under the stud or spark plug?