Board Logo

Flywheel sizes - where to measure?
Secoh - July 25th, 2004 at 01:01 PM

I have what I think to be an 1800 kombi flywheel, it is the 5 bolt pattern not the single big nut like the type one.

The friction area diameter is 210mm, but the overall space for the friction plate is 215mm. So which is this thing, 210 or 215mm? Was there a 210 type 4 flywheel? Outside dimenstion (ring gear) is the same as the caravelle flywheel I have.

I have a guy that wants to buy it, but before I send it I want to make sure it's exactly what I think it is.

thanks guys :)

Secoh - July 26th, 2004 at 11:12 AM

bump

1303Steve - July 26th, 2004 at 01:17 PM

Hi

Sounds like a 210 to me, Im pretty sure that 210s used 7mm bolts as well to hold the flywheel on. I meant 7mm bolts to hold the pressure plate on.

1302Steve

[Edited on 26-7-2004 by 1302Steve]

Secoh - July 26th, 2004 at 02:12 PM

Thanks Steve. :) I'd hate to take money for something that wasn't what I said it was.