Board Logo

standard wheel offset
BiX - August 31st, 2004 at 03:20 PM

ok who knows what the standard wheel offset is? for a 4.5 inch wheel on a super? Also the offset is measured form the inside of the wheel? eg the face closest to the car, and measured to the inside edge of the rim. Iam getting some slightly wider rims 7 inch rears and want to make the rim sit a little more in. and this is jsut for the rears the fronts will only be 6 to 6.5 inch.

and yes i have done a seacrh for this topic, but can't find info on standard wheel offsets.


Bizarre - August 31st, 2004 at 03:39 PM

c'mon Bix

You hang out at SBO!!!

Early Supers ET 34
Late Supers ET 41


Bizarre - August 31st, 2004 at 03:41 PM

hmmm...bugger

The old tech section seems to be gone :(


BiX - August 31st, 2004 at 04:03 PM

thanks blue

haven't been to sbo in months, seems to have died. ok now a tyre question. i run 205/60r15 ont eh rear. what would eb the best width to run? the tyres seem to be ebagged up with the 5.5 inch rims, but is 7inch to much?


Bizarre - August 31st, 2004 at 05:00 PM

i use to run 195's on 7" before on the 16"rims

Looked fine

Still - i ran 205 55 series on the kombi and that looks tight and ok?

I reckon she would be ok