Does anyone know what size Phillips head screwdriver I'd need to get out the door hinge screws on a 74 Beetle? The biggest one I found at Bunnings was a No.3 which looked woefully inadequate.

Cheers

Andrew

you may need to get an impact set to remove these , they have lage size phillips in them :beer

Yeah what ^ said,and when that dosnt work yule hafta get it off with an air impact thingo,slater dude.:thumb

Don't use an impact set to remove door screws, it will move the door post and the door gaps will never be the same. not to mention stuff the door screw.

Use the correct size screwdriver with a good torque grip handle, (Autopro sell them) this will get most tough screws out, if that doesnt work drill them out and retap the thread.

You need a Number 4, there around but you have to go to a good tool place.

Sweet thanks.